Technical points of laser engraving wood
Laser engraving is a technology that uses a laser beamto mark and engrave wood.
1. Choose the right wood: Different types of woodreact differently to lasers. Some woods such as laser engraving woods recommended by laser marking machine manufacturers include oak, walnut, cherry,etc. Make sure to choose a wood with a lower moisture content and fewer blemishes for better carving results.
2. Adjust laser marking parameters: Laser markingmachines usually provide parameter adjustment functions. You can adjust parameters according to the type, thickness and desired marking effect of wood.
3. Prepare appropriate design documents
4. Secure the wood: Before laser engraving, make surethe wood is securely fastened to the workbench to prevent movement or shaking.
5. Perform Testing and Calibration: Before carvingactual wood, it is important to perform some testing and calibration
6. Carry out laser engraving: When ready, according tothe requirements of the design document, put the wood into the laser markingmachine and start the engraving process.
7. Cleaning and post-processing: After carving iscompleted, use tools such as scrapers or brushes to remove residue from the wood surface. If desired, you can use paint, dye, or varnish to enhance the engraving and protect the wood surface.